Banner Image

uncompromising grip.

Dagga

Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
Dagga MTB Pedals Chromag Mountain Bike DH Downhill Pedals
¥26,400 JPY Sale Save
Colour PURPLE

Item is in stock Only 0 left in stock Item is out of stock Item is unavailable

An uncompromising pedal with the largest platform, widest stance and maximum amount of grip and strength

☛ Most grip and largest platform of all Chromag pedals
☛ Forged then post machined for highest strength
☛ True concave shape
☛ G3 Axle system featuring hardened chromoly axle, dual seals, inner bushing and precision cartridge bearing
☛ 24 height adjustable traction pins per pedal
☛ Unique Dagga pin with threaded tip
☛ Weight: 480g/pair

☛ Pair of pedals
☛ Spare pedal pins and washers for adjusting the pin height

☛ Alloy, forged / machined body
☛ Precision ground, hardened chromoly axle
☛ High density polymer bushing
☛ Cartridge bearing

Specs

Profile // Concave Design, 14.3mm at platform center

Material // Alloy, forged then machined.

Platform // 120mm x 115mm

Stance // 62.5mm

Pins // 24 per pedal, adjustable height, super grip

Weight // 480g/pair

Click here to view the pedal user guide.

CNC Machining

CNC Machining is a process in which a piece of raw material or stock is cut into a final desired shape using a computer controlled machine and often several different machine tools. Depending on the operation in question different tools are called, for example ball mills, end mills, thread mills, taps and slitting saws to name a few, all have different uses and come in all manner of shapes and sizes.

Machining produces extremely accurate parts, often to within 0.001" (I know, Canada is mostly metric but the industry predominately uses imperial units), and is renowned for creating a very high-end look with 3D surfacing and clean, strong edges which forging cannot produce.

Because every aspect of the part must be "cut out" machined parts take a long time to produce. A Ranger body for example takes 20 minutes to machine (the face plate is made separately), then it still needs to be deburred, quality checked, anodised, laser etched and assembled.

Banner Image

Questions?

Don't hesitate to reach out with any and all questions!

Contact Us

Worldwide shipping

We ship anywhere in the world with competitive rates from UPS and FedEx. Alternatively you can pickup right here at Chromag HQ.

Service Guide

Need more info on setup, service and spare parts?

Check out our user guides here.

Warranty

All of our components are backed by our 2 year warranty.
After that, we still have your back with our crash replacement program.

key features

All of our pedals are built upon this foundation.

G3 Axle System

We designed the G.3 axle system with longevity and serviceability in mind.

The G.3 system uses a high-strength chromoly axle with a double seal, inner bushing, and outer cartridge bearing.

Available here
Replaceable Pins

Our pin system is height adjustable via the included washers. They are easily replaceable from the other side of the pedal body, even if damaged. 

Some models feature alternate pin locations for customization, or if existing holes are damaged.

Each set comes with spare pins.

Available Here
Colours

All of our pedals are available in a wide range of colours to suit your style and match the rest of your bike.

(Even if your style is all black everything.)

Pedal FAQ's

All of our pedals use a 9/16" x 20tpi thread which is standard in the bike industry.

Our pedals will fit almost any bike with the exception of low-end 1 piece BMX cranks, some kids bikes or other very old bicycles.

Yes! You will get both a left and a right pedal.

Pedals have specific left and right threads (so they don't unscrew while you pedal). It is very important these are installed on the correct side.

The left pedal axle does have a little ridge around it (this becomes important if you are servicing your pedals), but the easiest way to tell is that the graphics/logos read the correct way around from the rider's point of view.

Yes! You will get some spare pins & washers in the box.

Your pedals will last a very long time. It's not uncommon for our pedals to last a decade or more with the right care.

The main wear you will encounter is damaged pins which are easily replaceable. If you run out, we sell packs here.

Sometimes it's a good idea to do a complete service on your pedals if they are running rough or if you have managed to bend an axle. You can change the axle, bushings and bearings which can be purchased here.

However more often than not, a quick strip-down, clean and regrease will keep your pedals running smooth for years to come.

Essentially Q-Factor is the distance between the pedal attachment points on the crank arms, also referred to as Tread. It could also be described as the width of your crankset. This affects your stance, if you've ever been snowboarding think of it as the same thing, essentially the distance between your feet.

Read up on it here.

A Chromag Pedal Guide
Chromag Bikes

Which pedal is right for me? So, you’re looking for a fresh set of pedals.  Naturally, getting a set of Chromag’s will ensure you are getting some of the best...

Customer Reviews

Based on 35 reviews
100%
(35)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Bryan S.
Who’s looking for a fight??!!

Rippa of a pedal. Scared to look at those sick pussies the wrong way. They’ll come at cha double cheeked up on a Tuesday and won’t let go. Chunky, just how I like my women and clingy as the ex. These pedals are more reliable than an avalanche rescue dog. Would recommend these to mee best mate and worst enemy so we could have a fight lata. There ya have it. Their straight daggas!!! Who’s yur daddy.

j
josh H.
Dagga pedals

Absolutely unreal, feet never slip and I’m always able to grip when doing tricks like crank flips

D
Downhill Z.
Still the best

The Daggas are my favorite platform pedal. Its the wide stance/Q-factor that really makes them stand out, having that extra room creates a more stable feeling for me. I run the front pins at full height, the rear pins with the stock washer installed, and I use Scarab pins on the outside to enhance the concave effect. Running them with 5.10 Impact Pro shoes. I was a clip-in guy for 20 years, but this combo has me switching to flats on my DH and enduro bikes. Big fan!

K
Kylan f.
Great pedals

The best pedal’s I have ever had

R
Robyn D.

Best pedal ever. Feel like you I am one with the bike

R
R.M.
Perfect for my Fred Flintstone feet

I run a super wide toe box (13 extra wide) and these pedals are wide enough to fit my wide feet. The pins are comfortable and I never feel like my foot is going to slip. Would easily recommend these to anyone looking for some of the best flat pedals I’ve ever used, especially if they have wide feet

E
Eric K.
Digging the Dagga’s

Soils flats…Lighter than the tmac’s but just as durable so far.

A
Anonymous
Can’t fault them

Just searched for the biggest platform pedals I could find then checked reviews from others, decided to take the risk and ship them over to the uk.

So glad I did made up with them, just a shame we get hit with so much duty otherwise a second set
Would have been bought. You won’t regret purchasing a set.